LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> FRONT SEATBACK HEATER (for Manual Seat) >> Installation [08/2016 - ] >> Procedure

Installation [08/2016 - ]: Procedure

  1. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH 
    1. Set the front seatback heater assembly LH on the separate type front seatback cover.
    2. Using a tacker, install the front seatback heater assembly LH to the separate type front seatback cover with 14 new tack pins as shown in the illustration.
      NOTE:

      Do not substitute other metal parts for tack pins.

      GTY377207Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER 

    Refer to PROCEDURE - Step 22

  3. INSTALL FRONT SEAT HEADREST SUPPORT 

    Refer to PROCEDURE - Step 23

  4. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY 

    Refer to PROCEDURE - Step 24

  5. INSTALL FRONT INNER SEAT CUSHION SHIELD LH (for Driver Side) 

    Refer to PROCEDURE - Step 25

  6. INSTALL FRONT INNER SEAT CUSHION SHIELD RH (for Front Passenger Side) 

    Refer to PROCEDURE - Step 26

  7. INSTALL FRONT SEAT CUSHION SHIELD LH 

    Refer to PROCEDURE - Step 27

  8. INSTALL VERTICAL ADJUSTING HANDLE LH (for Driver Side) 

    Refer to PROCEDURE - Step 28

  9. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH 

    Refer to PROCEDURE - Step 29

  10. INSTALL FRONT SEAT ASSEMBLY LH 

    Refer to INSTALLATION [08/2016 - ]

  11. INSPECT SEAT HEATER SYSTEM 

    Refer to OPERATION CHECK [12/2012 - ]

scientia non olet · About LEMON Manuals