Removal [12/2012 - 08/2016]: Procedure
- REMOVE FRONT SEAT ASSEMBLY RH
HINT:
Use the same procedure as for the driver seat.
Refer to REMOVAL [12/2012 - 08/2016]
- REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
- REMOVE FRONT SEAT CUSHION SHIELD RH
- REMOVE FRONT INNER SEAT CUSHION SHIELD RH
- REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
- Disconnect the rubber band.
- w/ Front Seat Side Airbag:
*1 Wire Harness Clamp *2 Connector Clamp - Remove the screw to disconnect the wire harness of the front seat inner belt assembly.
Detach the connector clamp and wire harness clamp.
- Disconnect the connector.
- Detach the 2 hooks.
- Remove the 4 bolts and separate type front seatback assembly.
- Disconnect the rubber band.
- REMOVE FRONT SEAT HEADREST SUPPORT
- REMOVE SEPARATE TYPE FRONT SEATBACK COVER
- REMOVE FRONT SEATBACK HEATER ASSEMBLY RH