LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> Lumbar Switch >> Inspection [12/2012 - ] >> Procedure

Inspection [12/2012 - ]: Procedure

  1. INSPECT POWER SEAT SWITCH ASSEMBLY 
    GTY370030Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *1 Hold Switch
    *2 Release Switch
    *a Component without harness connected
    (Power Seat Switch Assembly)
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Switch Condition Specified Condition
        5 (B) - 3 (H) Hold switch on Below 1 Ω
        2 (E) - 1 (R)
        2 (E) - 3 (H) Neutral Below 1 Ω
        2 (E) - 1 (R)
        2 (E) - 3 (H) Release switch on Below 1 Ω
        5 (B) - 1 (R)

        If the result is not as specified, replace the power seat switch assembly.

scientia non olet · About LEMON Manuals