Inspection [08/2016 - ]: Procedure
- INSPECT FRONT SEATBACK HEATER ASSEMBLY LH
*a Component without harness connected
(Front Seatback Heater Assembly LH)- Check the front seatback heater assembly LH.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 Seatback heater temperature 20°C (68°F) 1.68 to 1.72 Ω 1 - 3 Seatback heater temperature 20°C (68°F) 4.22 to 4.30 Ω If the result is not as specified, replace the front seatback heater assembly LH.
- Measure the resistance according to the value(s) in the table below.
- Check the front seatback heater assembly LH.