LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> RAV4 SE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Except Hybrid) >> Rear Combination Light Assembly >> Removal [12/2012 - 10/2015] >> Procedure

Removal [12/2012 - 10/2015]: Procedure

  1. REMOVE REAR COMBINATION LIGHT LENS AND BODY LH 
    1. Put protective tape around the rear combination light assembly LH.
      GTY363896Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Protective Tape
    2. Remove the 2 bolts.
    3. Move the rear combination light assembly LH in the direction of the arrow in the illustration, and detach the 2 clips.
    4. Turn the rear turn signal light bulb socket with the rear turn signal light bulb in the direction indicated by the arrow to disconnect them as a unit.
      GTY381596Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Turn the tail and stop light bulb socket with the tail and stop light bulb in the direction indicated by the arrow to disconnect them as a unit.
      GTY363630Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Remove the rear combination light lens and body LH.
  2. REMOVE TAIL AND STOP LIGHT BULB 
    1. Remove the tail and stop light bulb from the tail and stop light bulb socket.
      GTY363628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR TURN SIGNAL LIGHT BULB 
    1. Remove the rear turn signal light bulb from the rear turn signal light bulb socket.
      GTY363609Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals