LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> RAV4 Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Except Hybrid) >> License Plate Light Assembly >> Removal [12/2012 - ] >> Procedure

Removal [12/2012 - ]: Procedure

  1. REMOVE NO. 1 BACK DOOR SERVICE HOLE COVER 
    1. Using a screwdriver, detach the 4 claws and 4 guides to remove the No. 1 back door service hole cover.

      HINT: 

      Tape the screwdriver tip before use.

      GTY361195Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Protective Tape
  2. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH 
    GTY363582Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connector.
    2. Detach the 2 claws to remove the license plate light assembly LH.
scientia non olet · About LEMON Manuals