Inspection [08/2016 - ]: Procedure
- INSPECT FRONT SEAT CUSHION SPRING ASSEMBLY LH
- Check the operation of the slide motor LH.
- Apply battery voltage to the slide motor LH connector, and check that the slide motor LH operates smoothly as follows.
OK
Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Forward Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Backward If the result is not as specified, replace the front seat cushion spring assembly LH.
*a Component without wire harness connected
(Front Seat Cushion Spring Assembly LH(Slide Motor LH))
- Apply battery voltage to the slide motor LH connector, and check that the slide motor LH operates smoothly as follows.
- Check the operation of the front vertical motor LH.
- Apply battery voltage to the front vertical motor LH connector, and check that the front vertical motor LH operates smoothly as follows.
OK
Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Upward Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Downward If the result is not as specified, replace the front seat cushion spring assembly LH.
*a Component without wire harness connected
(Front Seat Cushion Spring Assembly LH(Front Vertical Motor LH))
- Apply battery voltage to the front vertical motor LH connector, and check that the front vertical motor LH operates smoothly as follows.
- Check the operation of the lifter motor LH.
- Apply battery voltage to the lifter motor LH connector, and check that the lifter motor LH operates smoothly as follows.
OK
Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Upward Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Downward If the result is not as specified, replace the front seat cushion spring assembly LH.
*a Component without wire harness connected
(Front Seat Cushion Spring Assembly LH(Lifter Motor LH))
- Apply battery voltage to the lifter motor LH connector, and check that the lifter motor LH operates smoothly as follows.
- Check the operation of the slide motor LH.
- INSPECT FRONT SEATBACK SPRING ASSEMBLY LH
- Check the operation of the lumbar support motor LH.
- Apply battery voltage to the lumbar support motor LH connector, and check that the lumbar support motor LH operates smoothly as follows.
OK
Condition Specified Condition Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Forward Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Backward If the result is not as specified, replace the front seatback spring assembly LH.
*a Component without wire harness connected
(Front Seatback Spring Assembly LH(Lumbar Support Motor LH))
- Apply battery voltage to the lumbar support motor LH connector, and check that the lumbar support motor LH operates smoothly as follows.
- Check the operation of the reclining motor LH.
- Apply battery voltage to the reclining motor LH connector, and check that the reclining motor LH operates smoothly as follows.
OK
Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Forward Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Backward If the result is not as specified, replace the front seatback spring assembly LH.
*a Component without wire harness connected
(Front Seatback Spring Assembly LH(Reclining Motor LH))
- Apply battery voltage to the reclining motor LH connector, and check that the reclining motor LH operates smoothly as follows.
- Check the operation of the lumbar support motor LH.