DTC C1694: Steering Angle Initialization Incomplete [10/2015 - ]: Procedure

1. Perform steering angle setting.
   1. Steering angle setting.

      Refer to CALIBRATION [10/2015 - ]

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  2

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [10/2015 - ]

2. Check for DTCs.

   Refer to DTC CHECK / CLEAR [10/2015 - ]

   HINT: 

   • If DTC C1694 is output, perform the steering angle setting again.
   • If DTC C1694 is still output after performing the steering angle setting 3 times, replace the television camera assembly.

   Result

   Result	Proceed to
   DTC C1694 is not output	A
   DTC C1694 is output	B

Result:  1

A 

END 

Result:  2

B 

REPLACE TELEVISION CAMERA ASSEMBLY. Refer to  REMOVAL [10/2015 - ]