LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Prius V Two >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> Hybrid Control System - (Diagnostic Codes (P0E32-585 - U0424-537) & Circuit Tests) >> Hybrid Control System >> DTC P3004-133: Power Cable Malfunction [08/2015 - ] >> Procedure

DTC P3004-133: Power Cable Malfunction [08/2015 - ]: Procedure

  1. CHECK DTC OUTPUT (HYBRID CONTROL) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
    4. Check if DTCs are output.

      Result

      Result Proceed to
      P3004-133 only is output. A
      DTCs other than P3004-133 is output. B
    5. Turn the power switch off.

    B → Refer to   2 

    A → Refer to   3 

  2. GO TO DTC CHART (HYBRID CONTROL SYSTEM). Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2015 - ] 
  3. REPLACE POWER MANAGEMENT CONTROL ECU. Refer to  COMPONENTS [08/2015 - ] 
scientia non olet · About LEMON Manuals