DTC B2611-96: Telescopic Position Sensor or Telescopic Motor Circuit Component Internal Failure [04/2018 - ]: Description
WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
The telescopic motor (steering column assembly) is operated by the power source voltage supplied from the multiplex tilt and telescopic ECU and slides the steering column assembly forward and backward. The telescopic position sensor (Hall IC) in the telescopic motor (steering column assembly) detects the sliding position of the steering column assembly in the forward and backward directions and sends a signal to the multiplex tilt and telescopic ECU based on that sliding amount.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2611-96 | Telescopic Position Sensor or Telescopic Motor Circuit Component Internal Failure | Telescopic operation stops within the operation range while operating. |
|