LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Prius Three >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System - Service Information (2 Of 2) >> Humidity Sensor >> Removal [11/2015 - 07/2020] >> Procedure

Removal [11/2015 - 07/2020]: Procedure

  1. REMOVE SENSOR COVER (w/o Rain Sensor) 
    1. Release the stopper by pulling it out as shown in the illustration.
      GTY579048Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Stopper
      Release
      Remove in this Direction
    2. Disconnect the air conditioning thermistor assembly with sensor cover from the windshield glass as shown in the illustration.
    3. Disengage the 2 claws and guide to remove the sensor cover.
      GTY552665Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE RAIN SENSOR COVER (w/ Rain Sensor) 

    Refer to PROCEDURE - Step 1

  3. REMOVE AIR CONDITIONING THERMISTOR ASSEMBLY (w/o Rain Sensor) 
    1. Disconnect the connector to remove the air conditioning thermistor assembly.
      GTY600643Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE RAIN SENSOR (w/ Rain Sensor) 

    Refer to PROCEDURE - Step 2

scientia non olet · About LEMON Manuals