LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Prius Three >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Cruise Control System - Service Information >> Driving Support Ecu >> Removal [12/2018 - 07/2020] >> Procedure

Removal [12/2018 - 07/2020]: Procedure

  1. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to REMOVAL [12/2018 - 08/2019] , or refer to REMOVAL [08/2019 - 07/2020]

  2. REMOVE DRIVING SUPPORT ECU ASSEMBLY 
    1. Remove the nut.
      GTY563709Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the guide.
    3. Disconnect the connector to remove the driving support ECU assembly.
      NOTE:

      Do not reuse the driving support ECU assembly if it has been dropped or subjected to a severe impact.

scientia non olet · About LEMON Manuals