DTC B2439: Headlight LH Circuit; DTC B243A: Headlight RH Circuit [12/2018 -]: Procedure
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / AFS / Trouble Codes.
- Clear the DTCs.
Body Electrical > AFS > Clear DTCs
Result
Proceed to NEXT
Result:
NEXT
See step 2
- CHECK FOR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Operate the light control switch to turn on the low beam headlights.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / AFS / Trouble Codes.
- Check for DTCs.
Body Electrical > AFS > Trouble Codes
OK
DTC B2439 and B243A are not output.
Result
Result Proceed to OK A NG (DTC B2439 is output) B NG (DTC B243A is output) C
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2018 - 07/2020] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2020 - 06/2021] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2021 -]
Result:
C
See step 6
Result:
B
See step 3
- CHECK HEADLIGHT UNIT ASSEMBLY LH
- Interchange the headlight unit assembly LH with RH and connect the connectors.
Refer to DISASSEMBLY [12/2018 -]
Result
Proceed to NEXT
Result:
NEXT
See step 4
- Interchange the headlight unit assembly LH with RH and connect the connectors.
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / AFS / Trouble Codes.
- Clear the DTCs.
Body Electrical > AFS > Clear DTCs
Result
Proceed to NEXT
Result:
NEXT
See step 5
- CHECK FOR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Operate the light control switch to turn on the low beam headlights.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / AFS / Trouble Codes.
- Check for DTCs.
Body Electrical > AFS > Trouble Codes
Result
Result Proceed to DTC B2439 is output A DTC B243A is output B
Result:
A
REPLACE NO. 1 HEADLIGHT ECU SUB-ASSEMBLY LH. Refer to REMOVAL [12/2018 -]
Result:
B
REPLACE HEADLIGHT UNIT ASSEMBLY LH. Refer to DISASSEMBLY [12/2018 -]
- CHECK HEADLIGHT UNIT ASSEMBLY RH
- Interchange the headlight unit assembly RH with LH and connect the connectors.
Refer to DISASSEMBLY [12/2018 -]
Result
Proceed to NEXT
Result:
NEXT
See step 7
- Interchange the headlight unit assembly RH with LH and connect the connectors.
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / AFS / Trouble Codes.
- Clear the DTCs.
Body Electrical > AFS > Clear DTCs
Result
Proceed to NEXT
Result:
NEXT
See step 8
- CHECK FOR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Operate the light control switch to turn on the low beam headlights.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / AFS / Trouble Codes.
- Check for DTCs.
Body Electrical > AFS > Trouble Codes
Result
Result Proceed to DTC B243A is output A DTC B2439 is output B
Result:
A
REPLACE NO. 1 HEADLIGHT ECU SUB-ASSEMBLY RH. Refer to REMOVAL [12/2018 -]
Result:
B
REPLACE HEADLIGHT UNIT ASSEMBLY RH. Refer to DISASSEMBLY [12/2018 -]