LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Prius Prime Advanced >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information >> Auxiliary Battery >> Installation [09/2016 - 05/2019] >> Procedure

Installation [09/2016 - 05/2019]: Procedure

  1. INSTALL AUXILIARY BATTERY 
    1. w/ Battery Insulator:
      1. Install the battery insulator to the auxiliary battery.
    2. Install the auxiliary battery.
    3. Set the battery clamp sub-assembly as shown in the illustration.
      GTY557023Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Install the bolt.

      Torque: 15.4 N*m (157 kgf*cm, 11 ft.*lbf) 

    5. Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.

      Torque: 5.6 N*m (57 kgf*cm, 50 in.*lbf) 

    6. Engage the 2 claws to close the battery terminal cap.
  2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    1. Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      NOTE:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Refer to INITIALIZATION [09/2016 - 05/2019]

scientia non olet · About LEMON Manuals