LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Prius Prime Advanced >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Diagnostic Codes & Symptom Tests >> Meter / Gauge System >> Symptom Tests >> Vehicle Proximity Notification System Warning Message Display Malfunction [09/2016 - 07/2020] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
  • Before replacing the hybrid vehicle control ECU, refer to Registration.

    Refer to REGISTRATION [09/2016 - 05/2019] , or refer to REGISTRATION [05/2019 - ]

  • The following troubleshooting procedure is based on the assumption that the vehicle proximity notification system is normal. Confirm that the vehicle proximity notification system is not malfunctioning before performing the following procedure.

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2016 - 07/2020]

scientia non olet · About LEMON Manuals