DTC B1500: Fuel Sender Open Detected [09/2016 - 12/2018]: Description

This DTC is stored when the combination meter assembly (meter circuit plate) detects a fuel sender gauge assembly malfunction via a direct line.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Memory
B1500	Fuel Sender Open Detected	Diagnosis Condition: The power switch is on (IG). IG power source voltage is 9.5 V or more. Malfunction Status: Voltage signal from fuel sender gauge assembly is 0.2 V or less 3 times consecutively Voltage signal from fuel sender gauge assembly is 4.7 V or more 3 times consecutively	Harness or connector Fuel suction tube with pump and gauge assembly Fuel sender gauge assembly Combination meter assembly (Meter circuit plate)	-

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

B1500

Fuel Sender Open Detected

Diagnosis Condition:

Malfunction Status:

Voltage signal from fuel sender gauge assembly is 0.2 V or less 3 times consecutively
Voltage signal from fuel sender gauge assembly is 4.7 V or more 3 times consecutively