DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Skid Control ECU; DTC U0131: Lost Communication with Power Steering Control Module; DTC U0142: Lost Communication with Main Body ECU; DTC U0151: Lost Communication with Airbag ECU; DTC U023A: Lost Communication with Front Camera Module [11/2015 - 06/2017]: Description
The combination meter assembly communicates with the ECM or hybrid vehicle control ECU, brake booster with master cylinder assembly (skid control ECU), power steering ECU assembly, main body ECU (multiplex network body ECU), airbag sensor assembly and pre-collision city sensor* via the CAN communication system.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0100 | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
| U0129 | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
| U0131 | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
| U0142 | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
| U0151 | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
| U023A* | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
- *: w/ Pre-collision System