LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Mirai >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (2 Of 2) & Circuit Tests >> Electronically Controlled Brake System >> DTC C1365-54: Accumulator Pressure Sensor Malfunction [06/2015 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:

When replacing the skid control ECU (brake booster with master cylinder assembly) or brake actuator (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.

Refer to INITIALIZATION [06/2015 - ]

scientia non olet · About LEMON Manuals