LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Mirai >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (2 Of 2) & Circuit Tests >> Electronically Controlled Brake System >> DTC C1311-11: Open in Main Relay 1 Circuit; DTC C1312-12: Short in Main Relay 1 Circuit [06-2015 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.

    Refer to INITIALIZATION [06/2015 - ]

  • Inspect the fuses for circuits related to this system before performing the following procedure.
scientia non olet · About LEMON Manuals