Removal [02/2014 - 11/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE EGR COOLER ASSEMBLY
Refer to REMOVAL [02/2014 - 11/2016]

REMOVE IGNITION COIL ASSEMBLY

Disconnect the 6 ignition coil assembly connectors.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*A	for Bank 1
*B	for Bank 2

Remove the 6 bolts and 6 ignition coil assemblies from the cylinder head cover sub-assembly.
NOTE:
If an ignition coil assembly has been struck or dropped, replace it.

HINT:

Arrange the removed parts in the correct order.

REMOVE SPARK PLUG

Remove the 6 spark plugs from the cylinder head sub-assembly.

NOTE:

If a spark plug has been struck or dropped, replace it.

HINT:

Arrange the removed parts in the correct order.