LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander XLE, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System (Service Information) (Except Hybrid) >> Occupant Classification Ecu >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

  1. REMOVE FRONT SEAT ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    For Manual Seat: Refer to REMOVAL [12/2013 - ]

    For Power Seat: Refer to REMOVAL [12/2013 - ]

  2. REMOVE OCCUPANT DETECTION ECU 
    1. Disconnect the 2 connectors.
      GTY432927Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
    2. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.
scientia non olet · About LEMON Manuals