LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander XLE, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> Lumbar Support Adjuster Assembly >> Removal [11/2016 - ] >> Procedure

Removal [11/2016 - ]: Procedure

  1. REMOVE FRONT SEAT ASSEMBLY 

    Refer to REMOVAL [12/2013 - ]

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System) 

    Refer to PROCEDURE - Step 6

  3. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System) 

    Refer to PROCEDURE - Step 7

  4. REMOVE FRONT SEAT INNER CUSHION SHIELD 

    Refer to PROCEDURE - Step 8

  5. REMOVE FRONT SEAT CUSHION SHIELD 

    Refer to PROCEDURE - Step 10

  6. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY 

    Refer to PROCEDURE - Step 19

  7. REMOVE FRONT SEAT HEADREST SUPPORT ASSEMBLY 

    Refer to PROCEDURE - Step 20

  8. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD 

    Refer to PROCEDURE - Step 21

  9. REMOVE FRONT SEAT BACK EDGE PROTECTOR 

    Refer to PROCEDURE - Step 26

  10. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY 
    1. GTY728083Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Disconnect the lumbar support adjuster assembly connector.

    2. Disengage the clamp.
    3. Disengage the 2 claws.
      GTY740067Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 2 guides to remove the lumbar support adjuster assembly from the front seatback frame sub-assembly.
  11. REMOVE FRONT SEAT BACK HOOK 

    Refer to PROCEDURE - Step 29

scientia non olet · About LEMON Manuals