LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander XLE, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (Except Hybrid) >> Hood >> Reassembly [12/2013 - ] >> Procedure

Reassembly [12/2013 - ]: Procedure

  1. INSTALL HOOD CUSHION 
    1. Engage the 2 claws to install 2 new hood cushions.
      GTY429945Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CONNECT WASHER HOSE ASSEMBLY 
    1. Engage the 6 clamps to connect the washer hose assembly.
      GTY429946Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  4. INSPECT WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  5. ADJUST WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  6. INSTALL HOOD INSULATOR 
    1. Engage the 2 guides.
      GTY429947Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the hood insulator with 7 new hood insulator clips.
  7. INSTALL HOOD TO RADIATOR SUPPORT SEAL 
    1. Install the hood to radiator support seal with 8 new hood to radiator support seal clips.
      GTY429948Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL HOOD TO RADIATOR SUPPORT SEAL 
    1. Install the hood to radiator support seal with 3 new hood to radiator support seal clips.
      GTY429949Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals