LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 111 (SFI System (2GR-FXS) - Diagnostic Codes - (Hybrid) (3 Of 4)) >> SFI System >> DTC P0014: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1); DTC P0015: Camshaft Position "B" - Timing Over-Retarded (Bank 1); DTC P0024: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 2); DTC P0025: Camshaft Position "B" - Timing Over-Retarded (Bank 2) [11/2016 - ] >> Description

DTC P0014: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1); DTC P0015: Camshaft Position "B" - Timing Over-Retarded (Bank 1); DTC P0024: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 2); DTC P0025: Camshaft Position "B" - Timing Over-Retarded (Bank 2) [11/2016 - ]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC P0013 (Refer to DESCRIPTION ).

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0014 Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1) Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).
  • Valve timing
  • Cam timing oil control solenoid assembly (for exhaust camshaft of bank 1)
  • Exhaust camshaft timing gear bolt assembly (camshaft timing oil control valve assembly [for exhaust camshaft of bank 1])
  • Camshaft timing exhaust gear assembly
  • Oil control valve filter
  • ECM
Comes on DTC stored
P0015 Camshaft Position "B" - Timing Over-Retarded (Bank 1) Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).
  • Valve timing
  • Cam timing oil control solenoid assembly (for exhaust camshaft of bank 1)
  • Exhaust camshaft timing gear bolt assembly (camshaft timing oil control valve assembly [for exhaust camshaft of bank 1])
  • Camshaft timing exhaust gear assembly
  • Oil control valve filter
  • ECM
Comes on DTC stored
P0024 Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 2) Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).
  • Valve timing
  • Cam timing oil control solenoid assembly (for exhaust camshaft of bank 2)
  • Exhaust camshaft timing gear bolt assembly (camshaft timing oil control valve assembly [for exhaust camshaft of bank 2])
  • Camshaft timing exhaust gear assembly
  • Oil control valve filter
  • ECM
Comes on DTC stored
P0025 Camshaft Position "B" - Timing Over-Retarded (Bank 2) Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).
  • Valve timing
  • Cam timing oil control solenoid assembly (for exhaust camshaft of bank 2)
  • Exhaust camshaft timing gear bolt assembly (camshaft timing oil control valve assembly [for exhaust camshaft of bank 2])
  • Camshaft timing exhaust gear assembly
  • Oil control valve filter
  • ECM
Comes on DTC stored