On-Vehicle Inspection [12/2013 - 11/2016]: Procedure
WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT COOLING FAN SYSTEM
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Powertrain / Engine / Active Test / Control the Electric Cooling Fan.
Powertrain > Engine > Active Test
Tester Display Control the Electric Cooling Fan - Check the operation of the fan while operating it using the Techstream.
If the cooling fan motor does not operate, check the cooling fan circuit.