LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Interior) - Service Information - (Except Hybrid) >> Glove Box Light >> Inspection [12/2013 - ] >> Procedure

Inspection [12/2013 - ]: Procedure

  1. INSPECT GLOVE BOX LIGHT ASSEMBLY 
    1. Apply battery voltage to the connector and check that the glove box light comes on.
      GTY447664Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Glove Box Light Assembly)

      OK

      Measurement Condition Condition Specified Condition
      Battery positive (+) → 2 (B)
      Battery negative (-) → 1 (E)      		 Always Glove box light comes on

      If the result is not as specified, replace the glove box light assembly.

scientia non olet · About LEMON Manuals