LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System (Service Information) (Except Hybrid) (2 Of 2) >> ROOM TEMPERATURE SENSOR (for Rear) >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

  1. REMOVE COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR 
    1. Apply protective tape around the cooler (No. 2 room temp. sensor) thermistor.
      GTY436307Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    2. Using a screwdriver, disengage the 4 claws to disconnect the cooler (No. 2 room temp. sensor) thermistor.

      HINT: 

      Tape the screwdriver tip before use.

    3. Disconnect the connector to remove the cooler (No. 2 room temp. sensor) thermistor.
scientia non olet · About LEMON Manuals