LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Engine Lubrication System (2GR-FE) (Service Information) (Except Hybrid)) >> Engine Oil Cooler >> Removal [12/2013 - 11/2016] >> Procedure

Removal [12/2013 - 11/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 2

  2. DRAIN ENGINE OIL 

    See step  1

  3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH 

    Refer to REMOVAL [12/2013 - 11/2016]

  4. REMOVE OIL COOLER ASSEMBLY 
    1. Remove the bolt.
      GTY449062Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A Type A
      *B Type B
      *1 No. 4 Water By-pass Hose
      *2 No. 5 Water By-pass Hose
    2. Disengage the 2 clamps to remove the 2 hose clamps.
    3. Slide the 4 clips and remove the No. 4 water by-pass hose and No. 5 water by-pass hose.
    4. Remove the oil cooler union bolt, oil cooler assembly and O-ring.
      GTY383449Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals