Remote Control System Does Not Operate [12/2013 - ]: Procedure

1. Check the key-linked and wireless transmitter-linked function.

   Refer to OPERATION CHECK [12/2013 - ] .

   Result	Proceed to
   Both the power windows and sliding roof operate by the key-linked and wireless transmitter-linked function	A
   The sliding roof does not operate by the key-linked or wireless transmitter-linked function, but all the power windows operate	B
   Both the power windows and roof glass do not operate by the key-linked or wireless transmitter-linked function	C

Result: 

A 

USE SIMULATION METHOD TO CHECK: 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2013 - 11/2016] .

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2016 - ] .

Result: 

C 

GO TO POWER WINDOW CONTROL SYSTEM: 

for Models with Jam Protection Function on 4 Windows: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2013 - ] .

for Models with Jam Protection Function on Front Door Windows: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2013 - ] .

Result: 

B 

Go to next step 

1. Check the sliding roof operation.

   Refer to OPERATION CHECK [12/2013 - ] .

   OK

   Sliding roof operates normally.

   Proceed to
   OK
   NG

Result: 

NG 

GO TO OTHER PROBLEM (Sliding Roof does not Move by Operating Sliding Roof Control Switch): 

Refer to Sliding Roof does not Move by Operating Sliding Roof Control Switch [12/2013 - ] .

Result: 

OK 

Go to next step 

1. Replace the sliding roof ECU (sliding roof drive gear sub-assembly).

   Refer to REMOVAL [12/2013 - ] .

Result: 

NEXT 

Go to next step 

1. Initialize the sliding roof ECU (sliding roof drive gear sub-assembly).

   Refer to INITIALIZATION [12/2013 - ] .

Result: 

NEXT 

See step  5

1. Check the key-linked and wireless transmitter-linked functions.

   Refer to OPERATION CHECK [12/2013 - ] .

   OK

   The key-linked and wireless transmitter-linked functions operate normally.

   Proceed to
   OK
   NG

Result: 

OK 

END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) WAS DEFECTIVE) 

Result: 

NG 

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU): 

Refer to REMOVAL [12/2013 - ] .