Caution / Notice / Hint

NOTE:

If the sliding roof ECU (sliding roof drive gear sub-assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear sub-assembly) must be initialized.
Refer to INITIALIZATION [12/2013 - ] .
The sliding roof system uses the LIN communication system. First, confirm that there are no malfunctions in the LIN communication system. Refer to How to Proceed with Troubleshooting.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2013 - ] .

HINT:

If DTC B2342 and B2343 are output simultaneously, perform troubleshooting for DTC B2342 first.