LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (Except Hybrid) >> Back Window Support >> Disposal [12/2013 - ] >> Procedure

Disposal [12/2013 - ]: Procedure

  1. DISPOSE OF BACK WINDOW STAY ASSEMBLY 
    1. Secure the back window stay assembly horizontally in a vise with the piston rod pulled out.
      GTY441751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Wearing safety glasses, gradually cut a part between A and B shown in the illustration using a metal saw to release the gas.

      Specification

      Area Measurement
      a 130 mm (5.12 in.)
      NOTE:

      Although the gas inside the back window stay assembly is colorless, odorless and harmless, metal debris may scatter. Therefore, cover the back window stay assembly with a piece of cloth or other material.

scientia non olet · About LEMON Manuals