LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System (Service Information) (Except Hybrid) >> Washer Nozzle (For Front Side) >> Adjustment [12/2013 - ] >> Procedure

Adjustment [12/2013 - ]: Procedure

  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY 

    Refer to REMOVAL [12/2013 - ] 

  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY 
    1. Select a washer nozzle sub-assembly so that the contact area is within the standard. Replace the washer nozzle sub-assembly with the selected one.
      GTY429636Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Washer Fluid Spray Angle *b Part Number
  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY 

    Refer to INSTALLATION [12/2013 - ] 

scientia non olet · About LEMON Manuals