Typical Malfunction Thresholds

OFF malfunction 

• Any of the following conditions are met: OFF malfunction (A), (B) or (C)
  OFF MALFUNCTION (A) AND (B)
  
  

  Neutral state flag

  ON

  OFF MALFUNCTION (C)
  
  

  Solenoid (SLT) valve

  ON malfunction

  • Any of the following conditions are met: Condition (a) or (b)
    CONDITION (A)
    
    

    ECM selected gear	4th
    4th gear pass detection	Not fixed after transition to latest gear

    CONDITION (B)
    
    

    ECM selected gear	6th
    6th gear pass detection	Not fixed after transition to latest gear

ON malfunction 

• Any of the following conditions are met: ON malfunction (A), (B), (C) or (D)
  ON MALFUNCTION (A) AND (B)
  
  

  Any of the following conditions are met	(a) or (b)
  (a) Turbine speed/Output speed (NT/NO)	1.401 or more and 1.581 or less (When output speed less than 350 rpm)
  (b) Turbine speed - Output speed x 4th gear ratio	-50 rpm or more and 50 rpm or less (When output speed 350 rpm or more)

  ON MALFUNCTION (C)
  
  

  Any of the following conditions are met	(a) or (b)
  (a) Turbine speed/Output speed (NT/NO)	0.934 or more and 1.065 or less (When output speed less than 750 rpm)
  (b) Turbine speed - Output speed x 6th gear ratio	-50 rpm or more and 50 rpm or less (When output speed 750 rpm or more)

  ON MALFUNCTION (D)
  
  

  Solenoid (SLT) valve

  ON malfunction

  • Any of the following conditions are met: Condition (a) or (b)
    CONDITION (A)
    
    

    ECM selected gear	5th
    5th gear pass detection	Not fixed after transition to latest gear

    CONDITION (B)
    
    

    ECM selected gear	8th
    8th gear pass detection	Not fixed after transition to latest gear

HINT: