DTC P0710-00: Transmission Fluid Temperature Sensor "A" Circuit Range/Performance [11/2016 - 10/2017]: Description

The ATF temperature sensor converts the automatic transaxle fluid (ATF) temperature into a resistance value for use by the ECM.

The ECM applies a voltage to the temperature sensor through terminal THO1 of the ECM.

The sensor resistance changes with the ATF temperature. As the temperature rises, the sensor resistance decreases.

One terminal of the sensor is grounded so that the sensor resistance and voltage decrease as the temperature rises.

The ECM calculates the ATF temperature based on the voltage signal.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0710-00	Transmission Fluid Temperature Sensor "A" Circuit Range/Performance	1. Diagnosis Condition, 2. Malfunction Status, 3. Malfunction Time, 4. Other DTC Detection Condition 1 Certain monitor enabling conditions are met. ATF temperature is less than 20°C (68°F). 3 seconds 2-trip detection logic DTC Detection Condition 2 Certain monitor enabling conditions are met. ATF temperature is 110°C (230°F) or higher 3 seconds 2-trip detection logic	Transmission wire (ATF temperature sensor) ATF temperature sensor circuit ECM	Comes on	DTC stored	SAE Code: P0711

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

Memory

Note

P0710-00

Transmission Fluid Temperature Sensor "A" Circuit Range/Performance

1. Diagnosis Condition, 2. Malfunction Status, 3. Malfunction Time, 4. Other
DTC Detection Condition 1

DTC Detection Condition 2

Comes on

DTC stored

SAE Code:
P0711