LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension (Service Information) (Except Hybrid) >> FRONT STABILIZER BAR (for AWD) >> Removal [11/2016 - ] >> Procedure

Removal [11/2016 - ]: Procedure

  1. REMOVE FRONT WHEELS 
  2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH 
    1. Remove the 2 nuts and front stabilizer link assembly LH from the front shock absorber assembly and front stabilizer bar.
      GTY431378Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

  3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH 

    HINT: 

    Perform the same procedure as for the LH side.

  4. REMOVE FRONT FRAME ASSEMBLY 

    Refer to REMOVAL [11/2016 - ] 

  5. REMOVE FRONT STABILIZER BAR 
    1. Remove the front stabilizer bar with 2 front No. 2 stabilizer brackets and 2 front No. 1 stabilizer bar bushings from the vehicle body.
  6. REMOVE FRONT NO. 1 STABILIZER BRACKET LH 
    1. Remove the front No. 1 stabilizer bracket LH from the front No. 1 stabilizer bar bushing.
  7. REMOVE FRONT NO. 1 STABILIZER BRACKET RH 

    HINT: 

    Perform the same procedure as for the LH side.

  8. REMOVE FRONT NO. 2 STABILIZER BRACKET LH 
    1. Remove the front No. 2 stabilizer bracket LH from the front No. 1 stabilizer bar bushing.
      GTY715240Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE FRONT NO. 2 STABILIZER BRACKET RH 

    HINT: 

    Perform the same procedure as for the LH side.

  10. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING 
    1. Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.
  11. REMOVE FRONT STABILIZER BAR PROTECTOR 
    1. Remove the clip.
      GTY732980Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the front stabilizer bar protector from the front stabilizer bar.
scientia non olet · About LEMON Manuals