LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Camry LE >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System (2AR-FE) (Diagnostic Codes (C1511-U0100) & Circuit Tests) (Except Hybrid) >> POWER STEERING SYSTEM (for 2AR-FE) >> DTC C1516: Torque Sensor Zero Point Adjustment Incomplete [08/2015 - ] >> Inspection Procedure

Inspection Procedure

NOTE:
  • If the electric power steering column sub-assembly has been replaced with a new one, perform torque sensor zero point calibration. Refer to CALIBRATION [08/2015 - ] .
  • If the power steering ECU assembly has been replaced with a new one, perform assist map writing and torque sensor zero point calibration. Refer to CALIBRATION [08/2015 - ] .
scientia non olet · About LEMON Manuals