LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Camry LE >> Repair and Diagnosis >> Restraints >> Seat Belts >> Pre-Collision System (Diagnostic Codes (C1A01-U0235) & Circuit Tests) (Except Hybrid) >> Pre-Collision System >> Circuit Tests >> Pre-collision System Cancel Switch Circuit [08/2015 - ] >> Inspection Procedure

Inspection Procedure

NOTE:

When replacing the driving support ECU assembly, always replace it with a new one. If a driving support ECU assembly which was installed to another vehicle is used, the information stored in the driving support ECU assembly will not match the information from the vehicle. As a result, a DTC may be stored.

scientia non olet · About LEMON Manuals