LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission (U660E) (Diagnostic Codes (P0500-U0100) & Circuit Tests) (Except Hybrid)) >> Automatic Transaxle System >> DTC P0724: Brake Switch "B" Circuit High [08/2015 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different variant/trim than selected.

This DTC indicates that the stop light switch remains ON. When the stop light switch remains ON during "stop and go" driving, the TCM interprets this as a fault in the stop light switch, illuminates the MIL, and stores the DTC. The vehicle must stop (less than 3 km/h (1.86 mph)) and go (30 km/h (18.65 mph) or more) five times for two consecutive driving cycles in order to set this DTC.