Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
| Engine | Running |
| Transmission counter gear revolution | 300 rpm or more |
| Battery voltage | 8 V or more |
| Engine switch | on (IG) |
| Starter | OFF |
| Either a or b is met (See below) | |
| a. All of the following conditions are met | |
| ECT | 20°C (68°F) or more |
| ECT sensor fail | Not detected |
| Time after PNP switch ON to OFF | 2 sec. or more |
| b. All of the following conditions are met | |
| ECT | Less than 20°C (68°F) |
| ECT sensor fail | Detected |
| Time after PNP switch ON to OFF | 30 sec. or more |