LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Power Window Control System (Diagnostic Codes (B2311-B2313) & Symptom Tests) (Except Hybrid) >> Power Window Control System >> Symptom Tests >> Jam Protection Function does not Operate [08/2015 - ] >> Inspection Procedure

Inspection Procedure

NOTE:
  • If the power window regulator motor assembly (for driver door) or power window regulator motor assembly (for front passenger door) has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [08/2015 - ] .
  • If the pulse sensor built into the power window regulator motor assembly (for driver door) or power window regulator motor assembly (for front passenger door) are malfunctioning, the power window control system enters fail-safe mode. The jam protection function cannot be operated during fail-safe mode. Refer to FAIL-SAFE CHART [08/2015 - ] .
scientia non olet · About LEMON Manuals