LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Power Window Control System (Diagnostic Codes (B2311-B2313) & Symptom Tests) (Except Hybrid) >> Power Window Control System >> Symptom Tests >> Driver Side Power Window does not Operate with Power Window Master Switch [08/2015 - ] >> Inspection Procedure

Inspection Procedure

NOTE:
  • The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ] .
  • If the power window regulator motor assembly (for driver door) has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [08/2015 - ] .
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
scientia non olet · About LEMON Manuals