LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Power Window Control System (Diagnostic Codes (B2311-B2313) & Symptom Tests) (Except Hybrid) >> Power Window Control System >> Symptom Tests >> Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated) [08/2015 - ] >> Inspection Procedure

Inspection Procedure

NOTE:
  • If the power window regulator motor assembly (for driver door) or power window regulator motor assembly (for front passenger door) has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [08/2015 - ] .
  • If the power window regulator motor assembly (for driver door) or power window regulator motor assembly (for front passenger door) and door window regulator sub-assembly have been removed and installed, or if the power window regulator motor assembly (for driver door) or power window regulator motor assembly (for front passenger door) was reused when a door glass or door glass run was replaced, initialize the power window control system. Refer to INITIALIZATION [08/2015 - ] .

HINT: 

This symptom may occur for any of the windows.

scientia non olet · About LEMON Manuals