LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Power Window Control System (Diagnostic Codes (B2311-B2313) & Symptom Tests) (Except Hybrid) >> Power Window Control System >> DTC B2313: Glass Position Initialization Incomplete [08/2015 - ] >> Inspection Procedure

Inspection Procedure

NOTE:
  • DTC B2313 is stored in each power window regulator motor assembly.
  • If the battery is disconnected while the ignition switch is ON, DTC B2313 is stored.
  • If the power window regulator motor assembly (for driver door) or power window regulator motor assembly (for front passenger door) has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [08/2015 - ] .
scientia non olet · About LEMON Manuals