DTC C2176/76: Receiver Error [08/2015 - ]: Procedure

CHECK DTC OUTPUT (C2176/76)
1. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
2. Turn the ignition switch off.
3. Turn the ignition switch to ON and check for DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
  OK
  
  DTC C2176/76 is not output.
NG → See step 2

OK → END
REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER. Refer to REMOVAL [08/2015 - ]