DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0101: Lost Communication with TCM; DTC U0142: Lost Communication with Body Control Module "B"; DTC U0155: Lost Communication with Instrument Panel Cluster Control Module (Combination Meter) [08/2015 - ]: Procedure
- CHECK DTC OUTPUT
- Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
- Check for DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ]
.
Result
Result Proceed to DTCs (CAN communication system DTC) are output A No DTCs are output B
B → See step 3
A → See step 2
- GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ]
- USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ]