Black Screen [08/2015 - ]: Procedure

CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR TELEVISION CAMERA ASSEMBLY) See step 1
NG → REPAIR OR REPLACE HARNESS OR CONNECTOR

OK: Go to next step
INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY (CGND, CA+) See step 2
NG → See step 5

OK: Go to next step
INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY (V+, GND1) See step 3
NG → See step 6

OK: Go to next step
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
1. Replace the radio and display receiver assembly with a new or known good one. Refer to REMOVAL [08/2015 - ] .
2. Check that the parking assist monitor system operates normally.
  OK
  
  Parking assist monitor system operates normally.
NG → See step 6

OK → END
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY. Refer to REMOVAL [08/2015 - ]
REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to REMOVAL [08/2015 - ]