DTC C1626: Steering Angle Sensor Failure [08/2015 - ]: Procedure

REPLACE STEERING SENSOR
1. Replace the steering sensor with a new or known good one. Refer to REMOVAL [08/2015 - ] .
NEXT: Go to next step

CHECK DTC OUTPUT

Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .

Recheck for DTCs and check that no DTCs are output. Refer to DTC CHECK / CLEAR [08/2015 - ] .

Result

Result	Proceed to
DTC C1626 is output	A
DTC C1626 is not output	B

B → END

A → See step 3

REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to REMOVAL [08/2015 - ]