No Sound can be Heard from Speakers [08/2015 - ]: Procedure
- CHECK AUDIO SETTINGS
- In sound output setting mode, set volume, fader and balance to the initial values and check that the sound is normal.
OK
Audio system returns to normal.
HINT:
Sound quality adjustment measures vary according to the type of amplifier.
NG → See step 2
OK → END
- In sound output setting mode, set volume, fader and balance to the initial values and check that the sound is normal.
- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE [08/2015 - ]