Cellular Phone Inspection [08/2015 - ]: Procedure

1. Check that the vehicle and cellular phone meet the following conditions:
   NOTE:

   If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.

   • The cellular phone is "Bluetooth" compatible. Refer to SYSTEM DESCRIPTION [08/2015 - ] .
   • The cellular phone is registered as a hands-free device.
   • "Bluetooth" setting of the cellular phone is on.
   • Operating system and software of the cellular phone are the latest versions.
   • There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
2. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

   Result

   Result	Proceed to
   The cellular phone is connected correctly.	A
   The cellular phone is not connected correctly.	B

B → See step   2 

A → END 

1. Restart the cellular phone.
2. Turn the ignition switch off.
3. Turn the ignition switch to ACC.
4. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

   Result

   Result	Proceed to
   The cellular phone is connected correctly.	A
   The cellular phone is not connected correctly.	B

B → See step   3 

A → END 

1. Check if the in-vehicle device can be recognized by the cellular phone.

   Result

   Result	Proceed to
   In-vehicle device can be recognized.	A
   In-vehicle device cannot be recognized.	B

B → See step   5 

A: Go to next step 

1. Clear all "Bluetooth" devices registered to the cellular phone and navigation receiver assembly.
2. Register the cellular phone again.
3. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

   Result

   Result	Proceed to
   The cellular phone is connected correctly.	A
   The cellular phone is not connected correctly.	B

B → See step   5 

A → END 

1. Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

   HINT: 

   • Make sure to obtain the customer's permission to perform this procedure.
   • After the inspection, clear the registered information and usage history acquired during the inspection.

   Result

   Result	Proceed to
   The cellular phone is connected correctly.	A
   The cellular phone is not connected correctly.	B

B → See step   6 

A → See step   7 

1. Check if the system functions normally using another "Bluetooth" compatible cellular phone.

   HINT: 

   • Make sure to obtain the customer's permission to perform this procedure.
   • After the inspection, clear the registered information and usage history acquired during the inspection.

   Result

   Result	Proceed to
   The cellular phone is connected correctly.	A
   The cellular phone is not connected correctly.	B

B → See step   7 

A → END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)