CD Sound Skips [08/2015 - ]: Procedure

1. Check that the CD is not deformed or cracked.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   No deformation or cracks on the CD.

NG → END (CD IS FAULTY) 

OK: Go to next step 

1. Check the CD.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   The CD is clean.

   NOTE:

   Do not use a conventional record cleaner or anti-static preservative.

   HINT: 

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NG → CLEAN CD 

OK: Go to next step 

1. Replace the CD with a new or known good one and check that the malfunction disappears.

   OK

   Malfunction disappears.

NG → See step   4 

OK → END (CD WAS FAULTY) 

1. Check the navigation receiver assembly installation condition.
   1. Check that the navigation receiver assembly is properly installed.

      OK

      The navigation receiver assembly is properly installed.

NG → REINSTALL NAVIGATION RECEIVER ASSEMBLY 

OK → See step   5